| Обозначение | Заглавие на русском языке | Статус | Язык документа | Цена (с НДС 20%)
в рублях |
|
|
Measurement of liquid velocity in open channels. Design, selection and use of electromagnetic current meters
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for tube of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 10 mm wall thickness) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for bars and extruded sections of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for forging stock and forgings of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for tube of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (not exceeding 10 mm wall thickness) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: not tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for ingots and castings of aluminium-copper-nickel-manganese-titanium-zirconium-cobalt-antimony alloy (solution treated and artificially aged) (Cu 5.0, Ni 1.5, Mn 0.25, Ti 0.2, Zr 0.2, Co 0.2, Sb 0.2)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and aged at room temperature) (Cu 4, Si 1)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and artificially aged) (Cu 4, Si 1)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification. Bars and extruded sections of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for extruded bars and sections of aluminium-zinc-copper-chromium alloy (solution treated, controlled stretched and artificially aged) (not exceeding 150 mm diameter or minor sectional dimension) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.23) (7075)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for forging of aluminium-zinc-magnesium-manganese-copper alloy (supplied as-forged or annealed for subsequent heat treatment) (not exceeding 150 mm diameter or minor sectional dimension) (Zn 5.7, Mg 2.7, Mn 0.5, Cu 0.5) (7014)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for extruded, rolled or cast forging stock of aluminium-zinc-magnesium-manganese-copper alloy (for manufacture of forgings to BS L 171) (Zn 5.7, Mg 2.7, Mn 0.5, Cu 0.5) (7014)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for castings of aluminium-silicon-magnesium alloy, chill cast (solution treated and precipitation treated to an overaged (T7) condition)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for castings of aluminium-silicon-magnesium alloy, sand cast (solution treated and precipitation treated to an overaged (T7) condition)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for forging stock and forgings of magnesium-6% aluminium-zinc alloy (Al 6.0, Zn 1.0)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
| Страницы: ... / 1966 / 1967 / 1968 / 1969 / 1970 / 1971 / 1972 / 1973 / 1974 / 1975 / 1976 / 1977 / 1978 / 1979 ... / 2197 |