| Обозначение | Заглавие на русском языке | Статус | Язык документа | Цена (с НДС 20%)
в рублях |
|
|
Specification for Mushroom head aluminium alloy rivets
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Aerospace series. 100 countersunk head high nickel-copper alloy rivets
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for corrosion-resisting steel split cotter pins for aircraft. Inch series
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for carbon steel worm drive clamps for aircraft
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for elastomeric grommets (acrylonitrile-butadiene) for aerospace use
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Aerospace series. Bushes (plain and flanged), press-fit and thrust washers, oil‑retaining sintered bronze. Specification
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for elastomeric grommets (polychloroprene) for aerospace use
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for internal retaining rings (imperial sizes)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specifications for turnbarrels, tension rods and swaged cable-end connections (Unified threads),* cadmium plated, for aircraft
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for swaged cable-end assemblies (Unified threads) for preformed steel wire rope (W.9) for aircraft
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for swaged cable-end assemblies (Unified threads) for preformed non-corrodible steel wire rope (W.11) for aircraft
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for Unified aluminium alloy washers
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for Washers, plain, Unified inch sizes, alloy steel, cadmium plated for Aerospace Use
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for Unified corrosion-resistant steel washers
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 550 MPa) (weldable)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for cold drawn 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 800 MPa) (weldable)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon- carbon alloy (tensile strength 1250-1420 MPa) (limiting ruling section 25 mm)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1250-1420 MPa) (limiting ruling section 25 mm)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for bar for machining of titanium- aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
| Страницы: ... / 233 / 234 / 235 / 236 / 237 / 238 / 239 / 240 / 241 / 242 / 243 / 244 / 245 / 246 ... / 2197 |