| Обозначение | Заглавие на русском языке | Статус | Язык документа | Цена (с НДС 20%)
в рублях |
|
|
Specification for nickel-chromium-titanium-aluminium heat-resisting alloy seamless tubes (Nickel base, Cr 19.5, Ti 2.2, Al 1.4)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for nickel-chromium-cobalt-titanium- aluminium heat-resisting alloy cold drawn wire for springs and springs (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for nickel-chromium-cobalt-titanium- aluminium heat-resisting alloy cold drawn and solution treated wire for springs and springs (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for nickel-chromium-cobalt-titanium- aluminium heat-resisting alloy wire for thread inserts (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) (0.45 mm to 2 mm diameter)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for nickel-chromium-titanium heat-resisting alloy bar and wire for rivets and rivets (Maximum diameter or minor sectional dimension 20 mm) (Nickel base, Cr 19.5, Ti 0.4)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for pressure-sensitive adhesive identification tape
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for tube of aluminium-copper-mangesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for sheet and strip of aluminium-2% magnesium alloy (temper designation-O)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for sheet and strip of aluminium-2% magnesium alloy (temper designation H16 or H26)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for ingots and castings of magnesium-8% aluminium-zinc-manganese alloy (solution treated) (Al 8, Zn 0.5, Mn 0.3)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Procedure for inspection, testing and acceptance of wrought magnesium base alloys
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Breathing oxygen for airborne applications
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for mild steel billets, bars, forgings and parts (suitable for bearing shells)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for 1 per cent nickel-chromium-molybdenum steel. (880/1080 MPa: limiting ruling section 150 mm)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for 2.5% nickel-chromium-molybdenum (high carbon) steel billets, bars, forging and parts (1 160 - 1 310 MPa: limiting ruling section 155 mm)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for carbon-molybdenum steel (bar for the manufacture of forged bolts only)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for Carbon steel. (Bar for the manufacture of forged bolts only)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification. 3% chromium-molybdenum-vanadium steel billets, bars, forgings and parts (1320-1470 MPa: limiting ruling section 70 mm) (suitable for nitriding)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1130-1330 MPa)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for Chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1270 MPa to 1470 MPa)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
| Страницы: ... / 238 / 239 / 240 / 241 / 242 / 243 / 244 / 245 / 246 / 247 / 248 / 249 / 250 / 251 ... / 2197 |