| Обозначение | Заглавие на русском языке | Статус | Язык документа | Цена (с НДС 20%)
в рублях |
|
|
Aerospace series. Procedure for inspection, testing and acceptance of wrought heat-resisting alloys
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for nickel-chromium-titanium-aluminium heat-resisting alloy bar and wire (maximum diameter or minor sectional dimension of 30 mm) for the manufacture of fasteners (nickel base, Cr 19.5, Ti 2.2, Al 1.4)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for pressure-sensitive adhesive water resistant PVC tape
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for pressure-sensitive adhesive paper masking tape
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for tube of 99% aluminium (cold drawn: seamless: tested hydraulically) (not exceeding 12 mm wall thickness)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for tube of aluminium-2% magnesium alloy (temper designation-O) (seamless: tested hydraulically) (not exceeding 12 mm wall thickness)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Aircraft oxygen systems and equipment. Design and installation
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Aircraft oxygen systems and equipment. Testing of equipment and systems
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Aircraft oxygen systems and equipment. Guide to the physiological factors
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Aircraft oxygen systems and equipment. Guidance and recommendations on the selection of materials for use with oxygen
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for Carbon case-hardening steel
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for 4 per cent nickel-chromium-molybdenum steel (Air hardening). (1545 MPa: limiting ruling section 63.5mm)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification. 3% chromium-molybdenum steel billets, bars, forgings and parts (930-1080 MPa: limiting ruling section 150 mm) (suitable for nitriding)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Aerospace series. Procedure for inspection, testing and acceptance of steel sheet and strip
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Specification for carbon manganese steel tube (700 MPa) (Tube 12.5 mm outside diameter and greater) (Weldable)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Colour matching fan
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Copy preparation and proof correction. Marks for copy preparation and proof correction (extracted from BS 5261-2:2005)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Copy preparation and proof correction. Marks for copy preparation and proof correction (extracted from BS 5261- 2:2005)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Copy preparation and proof correction. Marks for copy preparation and proof correction (extracted from BS 5261- 2:2005)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
|
|
Copy preparation and proof correction. Marks for copy preparation and proof correction (extracted from BS 5261- 2:2005)
|
|
|
На языке оригинала
|
Пишите на gost@gostinfo.ru
|
|
| Страницы: ... / 241 / 242 / 243 / 244 / 245 / 246 / 247 / 248 / 249 / 250 / 251 / 252 / 253 / 254 ... / 2197 |