Постоянная ссылка
https://www.standards.ru/document/4047511.aspx

DIN EN 1941-1996

Ленты самоприклеивающиеся. Измерение удлинения при разрыве

На языке оригиналаПоложить в корзину
Заказать перевод

Библиография

ОбозначениеDIN EN 1941-1996
Заглавие на русском языкеЛенты самоприклеивающиеся. Измерение удлинения при разрыве
Заглавие на английском языкеSelf adhesive tapes - Measurement of elongation at break; German version EN 1941:1996
Дата опубликования01.04.1996
МКС83.180
Аннотация (область применения)The document specifies a method to measure the elongation of a self adhesive tape when it is subjected to a tensile force sufficient to cause it to break. The elongation at break of the adhesive tape is of value as an indication of its uniformity and quality, as well as a rough indication of its ability to conform to curved and irregular surfaces. It is usually determined at the same time as the breaking strength. The maximum width of adhesive tape tested by this method is 25 mm. For adhesive tapes of this width or less, the elongation at break measured corresponds to that as supplied commercially with factory-cut edges. For adhesive tapes wider than 25 mm, this test method provides for the tape to be cut down to 25 mm with a well-sharpened instrument.
Вид стандартаST
Обозначение заменяющегоDIN EN 14410(2003-06)
Язык оригиналанемецкий
Количество страниц оригинала4
Перекрестные ссылки
Код ценыPreisgruppe 6

Стандарт DIN EN 1941-1996 входит в рубрики классификатора: